光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

焦炉上升管内壁结焦炭层的光谱学分析及结焦机理研究

以焦炉上升管内壁结焦炭层块为研究对象，采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）、傅里叶红外光谱仪（FTIR）和激光共聚焦拉曼光谱仪（Raman）对结焦炭层的元素组成，以及各结焦炭层的矿物组成、组成结构和分子结构进行测试。分析从结焦炭层块外表面向内表面过渡的各结焦炭层的差异性，揭示焦炉上升管内壁结焦机理。结果表明焦炉上升管内粉尘中Fe，S和Cr极易催化荒煤气中蒽、萘等稠环芳烃化合物成炭，在焦炉上升管内壁形成炭颗粒沉积，为焦油凝结挂壁提供载体，在荒煤气温度降至结焦温度时易结焦积碳。结焦炭层均含有芳香层结构，随着结焦炭层从外表面向内表面过渡，各结焦炭层的面层间距(d₀₀₂)逐渐降低、层片直径(L_a)先降低后增加、层片堆砌高度(Lc)和芳香层数(N)先稳定后增加。结焦炭层石墨化过程是由结焦炭层内表面向外表面进行，主要包括其片层外缘的羧基和部分C-O结构的降解剥离，从而形成高度规整的共轭结构。结焦炭层块中C元素是以结晶碳与无定型碳的混合物形式存在。以上研究为解决焦炉上升管内壁结焦及腐蚀问题，提高换热器换热效率，有效回收焦炉荒煤气显热，降低焦化企业能耗提供实验基础和理论依据。     

Curvature investigation in tapered fibers and its application to sensing and mode conversion

Non-adiabatic tapered fibers are basic photonic components used in a wide range of applications. Here we investigate a way to increase their utility through the controllable bending of one of their tapered sections. The experiments carried out explain, for the first time, the mechanics of this approach showing how these tapers can be used to build more sensitive sensors. Their use as highly efficient mode converters is also discussed.     

Synthesis of α-fluoro-α,β-unsaturated esters monitored by 1D and 2D benchtop NMR spectroscopy

For optimization and control of pharmaceutically and industrially important reactions, chemical information is required in real time. Instrument size, handling, and operation costs are important criteria to be considered when choosing a suitable analytical method apart from sensitivity and resolution. This present study explores the use of a robust and compact nuclear magnetic resonance (NMR) spectrometer to monitor the stereo-selective formation of α-fluoro-α,β-unsaturated esters from α-fluoro-β-keto esters via deprotonation and deacylation in real time. These compounds are precursors of various pharmaceutically active substances. The real-time study revealed the deprotonation and deacylation steps of the reaction. The reaction was studied at temperatures ranging from 293 to 333 K by interleaved one-dimensional ¹H and ¹⁹F and two-dimensional ¹H–¹H COSY experiments. The kinetic rate constants were evaluated using a pseudo first-order kinetic model. The activation energies for the deprotonation and deacylation steps were determined to 28 ± 2 and 63.5 ± 8 kJ/mol, respectively. This showed that the deprotonation step is fast compared with the deacylation step and that the deacylation step determines the rate of the overall reaction. The reaction was repeated three times at 293 K to monitor the repeatability and stability of the system. The compact NMR spectrometer provided detailed information on the mechanism and kinetics of the reaction, which is essential for optimizing the synthetic routes for stepwise syntheses of pharmaceutically active substances.     

甲基环己烷在9∽15.5 eV能量区的真空紫外光电离研究

利用具有同步辐射源的反射式飞行时间质谱仪，研究甲基环己烷的真空紫外光电离和光解离. 观测到母体离子C₇H₁₄⁺和碎片离子C₇H₁₃⁺，C₆H₁₁⁺，C₆H₁₀⁺，C₅H₁₀⁺，C₅H₉⁺，C₄H₈⁺，C₄H₇⁺和C₃H₅⁺的光电离效率曲线. 测定甲基环己烷的电离能为9.80±0.03 eV，通过光电离效率曲线确定其碎片离子的出现势. 在B3LYP/6-31G(d)水平上对过渡态、中间体和产物离子的优化结构进行表征，并使用G3B3方法计算其能量. 提出主要碎片离子的形成通道. 分子内氢迁移和碳开环是甲基环己烷裂解途径中最重要的过程.     

Measurement and quantitative analysis of fiber orientation distribution in long fiber reinforced part by injection molding

The fiber orientation distribution is one of the important microstructure variables for thermoplastic composites reinforced with discontinuous fibers. In this paper, the long fibers in the injection molded part are measured in detail by micro X-ray CT. A three dimensional (3D) structure of the sample is built and two dimensional images are generated for image analysis. The orientation tensor of fibers is calculated in the flow plane. It shows a symmetric distribution of fibers through the thickness direction, which consists of outer skin, transition zone and the core. The skin layer is so thin that it has only one layer of highly oriented fibers. The core layer also has highly oriented fibers but the direction of fibers is different from that in the skin layer. Nevertheless, the clustering of the fibers is characterized quantitatively in the core. The transition zone can be divided into two subzones by the principal directions of the tensor.     

A new Monte Carlo model for predicting the mechanical properties of fiber yarns

Understanding the complicated failure mechanisms of hierarchical composites such as fiber yarns is essential for advanced materials design. In this study, we developed a new Monte Carlo model for predicting the mechanical properties of fiber yarns that includes statistical variation in fiber strength. Furthermore, a statistical shear load transfer law based on the shear lag analysis was derived and implemented to simulate the interactions between adjacent fibers and provide a more accurate tensile stress distribution along the overlap distance. Simulations on two types of yarns, made from different raw materials and based on distinct processing approaches, predict yarn strength values that compare favorably with experimental measurements. Furthermore, the model identified very distinct dominant failure mechanisms for the two materials, providing important insights into design features that can improve yarn strength.     

Interfacial Assembly of Nanocrystals on Nanofibers with Strong Interaction for Electrocatalytic Nitrate Reduction

One-dimensional fiber architecture serves as an excellent catalyst support. The orderly arrangement of active materials on such a fiber substrate can enhance catalytic performance by exposing more active sites and facilitating mass diffusion; however, this remains a challenge. We developed an interfacial assembly strategy for the orderly distribution of metal nanocrystals on different fiber substrates to optimize their electrocatalytic performance. Using electrochemical nitrate reduction reaction (NO₃⁻RR) as a representative reaction, the iron-based nanofibers (Fe/NFs) assembly structure achieved an excellent nitrate removal capacity of 2317 mg N/g Fe and N₂ selectivity up to 97.2 %. This strategy could promote the rational design and synthesis of fiber-based electrocatalysts.     

Braided Fiber Current Collectors for High-Energy-Density Fiber Lithium-Ion Batteries

Fiber lithium-ion batteries represent a promising power strategy for the rising wearable electronics. However, most fiber current collectors are solid with vastly increased weights of inactive materials and sluggish charge transport, thus resulting in low energy densities which have hindered the development of fiber lithium-ion batteries in the past decade. Here, a braided fiber current collector with multiple channels was prepared by multi-axial winding method to not only increase the mass fraction of active materials, but also to promote ion transport along fiber electrodes. In comparison to typical solid copper wires, the braided fiber current collector hosted 139 % graphite with only 1/3 mass. The fiber graphite anode with braided current collector delivered high specific capacity of 170 mAh g⁻¹ based on the overall electrode weight, which was 2 times higher than that of its counterpart solid copper wire. The resulting fiber battery showed high energy density of 62 Wh kg⁻¹.     

Preparation of Alum-borneol-PVP Drug-loaded Fibers by Electrospinning

The alum-borneol nanoemulsion(ABN), which combines the mineral medicine alum and the botanical medicine borneol, has been applied for approximately 40 years in the clinical treatment of burns, scalds, radiation dermatitis and shingles, and has a good curative effect. However, the current formula and dosage form of ABN pose problems of low borneol content and ease of precipitation, which greatly affects the efficacy of the drug. In this study, polyvinylpyrrolidone(PVP) was selected as a carrier mixed with different proportions of alum and borneol to produce alum-borneol-PVP fibers(ABPF) by electrospinning. The results showed that the stable system with good drug dispersion was 2:3(alum:borneol). The dissolution content of borneol from the ABPF was about 80% in 4 h, which was much higher than that of the alum-borneol liquid(ABL) and ABN. The ABPF membrane showed a more significant inhibitory effect on Staphylococcus aureus than the ABL and ABN. The composite fiber markedly increased the drug content of borneol, which was 800 times of that in ABN. The fiber had a higher solubility than the nanoemulsion in vitro, which is of great importance for the de-velopment of new forms for the clinical application of alum and borneol.